News Details
Pipeline resistance deflagration flame arrestor introduction!
Release time:
2024-09-27 16:59
Source:
6113 pipeline deflagration arrestors are suitable for installation in short or long pipelines close to potential ignition sources. The flame develops at a low sonic speed and has not yet reached the detonation stage, thereby preventing the flame from entering the surrounding area.
Parameter characteristics
Applicable size 1 "(DN25)~ 40" (1000mm)
Applicable gas components ⅡA, ⅡB3, ⅡC
Small pressure drop and large flow
Removable and replaceable flame retardant elements for easy inspection and maintenance
Standard Thread Temperature Sensor Interface
Working principle:
Pipeline deflagration flame arrestor, through the precision flame arrestor element to subsonic flame speed to extinguish the flame, to prevent the spread of flame. All burning gases have a defined gap through which the flame cannot pass, which is called the large test safety gap. In order to extinguish the flame, the height of the flange of the flame retardant metal element is less than the large test safety gap of gas or steam, so as to prevent the flame from continuing to spread.
Application occasions:
. Ground torch tower
. Chemical process plant and petroleum refining plant
. Sewage Biogas Treatment Plant
. Waste Incineration Plant
Previous Page
Related Information
Positive arch slit rupture disc/LF introduction!
A positive arched rupture disk with weakened grooves is machined on the rupture disk.
Pipeline resistance deflagration flame arrestor introduction!
6113 pipeline deflagration arrestors are suitable for installation in short or long pipelines close to potential ignition sources.
7100 single call valve product introduction!
The 7100 single call valve is normally installed in parallel on the top of the storage tank.
8100 emergency relief valve product introduction!
8100 emergency relief valves are widely used in large-capacity liquid storage tanks.